Galway Jacket

This jacket is worked in one piece to underarms then divided for Fronts and Back. Back and Fronts are then worked separately to shaped shoulders.
Skill Level: Experienced

Yarn Weight: #4

SIZES

■ Jacket is sized to fit Women’s X-Small (Small, Medium, Large, X-Large).

FINISHED MEASUREMENTS

• Bust 32 (36, 40, 44, 48)”

• Length 26 (27, 28, 29, 30)”

■ Upper Arm 14 (15, 16, 17, 18)” MATERIALS

■ 7 (7, 8, 8, 9) 100 g (210 yd) balls Plymouth Yarn Co. Galway Worsted (100% pure wool) color #748 Pistachio Heather

• Size 7 US (4.5 mm) needles OR SIZE TO OBTAIN GAUGE

■ Size 7 US (4.5 mm) 36″ circular needle

■ Crochet hook (to ladder stitches)

■ Cable needle, stitch markers, stitch holders, yarn needle

• 1,18″ separating zipper GAUGE

■ 21 sts x 28 rows = 4″ in St st

DESIGNER NOTES

• 3-st Tuck Rib sections of Cable and Tuck Rib (lower edge and Collar) are worked in St st, then sts are dropped and reformed after working Lower band and Collar.

■ Cables turn toward center Fronts; direction reverses at center Back.

■ Markers are placed for center Back cable and sides. It may be helpful to pm after ea rep of patt, using different color markers.

STITCH GLOSSARY Short Row Shaping

Work the number of sts indicated in the instructions, wrp-t; return to starting point. Work progressively longer/shorter rows as indicated in the instructions. Work wraps together with wrapped sts as you come to them, as follows: Insert RH ndl into wrap at base of
wrapped st from beneath, then bring RH ndl up and into st on LH ndl, ready to work the st; knit (or purl) wrap and st tog.




Wrap and Turn (wrp-t)

(RS) Yarn forward (to the purl position), slip next st to RH ndl, yarn back (to the knit position), return slipped st, (which is now wrapped), to LH ndl; turn, leaving rem sts unworked.

(WS) Yarn back (to the knit position), slip next st to RH ndl, yarn forward (to the purl position), return slipped st, (which is now wrapped), to LH ndl; turn, leaving rem sts unworked.

C3B CABLE (3 st-panel)

Row 1 (RS): K3.

Row 2: P3.

Row 3: SI 2 sts to cn, hold to back, K1, K2 from cn.

Row 4: Rep Row 2.

Rep Rows 1-4 for C3B Cable.

C3F CABLE (3-st panel)

Also see Chart.

Row 1 (RS): K3.

Row 2: P3.

Row 3: S11 st to cn, hold to front, K2, K1 from cn.

Row 4: Rep Row 2.

Rep Rows 1-4 for C3F Cable.

C4B CABLE (4-st panel)

Also see Chart.

Rows 1 and 5 (RS): K4.

Row 2 and all WSRs: P4.

Row 3: SI 2 sts to cn, hold to back, K2, K2 from cn.

Row 6: Rep Row 2.

Rep Rows 1-6 for C4B Cable.

C4F CABLE (4-st panel)

Also see Chart.

Rows 1 and 5 (RS): K4.

Row 2 and all WSRs: P4.

Row 3: SI 2 sts to cn, hold to front, K2, K2 from cn.
Row 6: Rep Row 2.

Rep Rows 1-6 for C4F Cable.
C5B CABLE (5-st panel)

Also see Chart.

Rows 1,5, and 7 (RS): K5.

Row 2 and all WSRs: P5.

Row 3: SI 2 sts to cn, hold to back, КЗ, K2 from cn.

Row 8: Rep Row 2.

Rep Rows 1-8 for C5B Cable.

C5F CABLE (5-st panel)

Also see Chart.

Rows 1,5, and 7 (RS): K5.

Row 2 and all WSRs: P5.

Row 3: SI 3 sts to cn, hold to front, K2, K3 from front cn.

Row 8: Rep Row 2.

Rep Rows 1-8 for C5F Cable.

TUCK RIB (multiple of3 sts)

Also see Chart.

Row 1 (RS): Knit.

Row 2: Purl.

Rep Rows 1 and 2 for 22 rows, end after WSR. Using circ ndl, slip first st, ‘using crochet hook or latch hook, insert hook into st above CO below next st, drop st and ladder down to hook, [go under 2 bars and pull second bar through to the front] 11 times, place last st on RH ndl, si 1; rep from * * once [3 sts worked in Tuck Rib]. Rep for each 3-st Tuck rib section between Cables.

BODY CABLE & TUCK RIB (27-strep)

Note: Patt is est on Row 3; work the sts that will become Tuck Rib in St st, and keep ea Cable panel in alignment, working the correct number of rows between ea Cable turn. Reverse the direction of the Cables at center Back by working ea cable as its mirror image (turning in opposite direction).

Row 1 (RS): Knit, pm ea side of 4 center Back sts 95 (103,116,124,137) sts ea side of m’s. Slip m‘s every row.

Row 2 and all WSRs: Purl.

Row 3 (Set-Up Row): Beg Right Front as foil for your size:

Note: K3 between Cables = Tuck Rib.

Size XS Only

K2 (1 edge st-keep in St st, 1 Tuck st); work 27-st CB rep (right-slanting cables) 3 times, (12 sts rem before m), [СЗВ, K3] twice; C4B (4 center sts); [K3, C3F] twice; work 27-st CF rep (left-slanting cables) 3 times, end K2 (1 tuck st, 1 edge st-keep in St st) [194 sts]. Size S Only

K2 (1 edge st-keep in St st, 1 Tuck st); work 27-st CB rep (right-slanting cables) 3 times,
(20 sts rem before m), СЗВ, K3, C5B, K3, СЗВ, КЗ; C4B (4 center sts); K3, C3F, K3, C5F, K3, C3F, K3, work 27-st CF rep (left-slanting cables) 3 times, end K2 (1 tuck st, 1 edge st-keep in St st) [210 sts].

Size M Only

K2 (1 edge st-keep in St st, 1 Tuck st); work 27-st CB rep (right-slanting cables) 4 times, (6 sts rem before m), СЗВ, КЗ; C4B (4 center sts); K3, C3F, work 27-st CF rep (left-slanting cables) 4 times, end K2 (1 tuck st, 1 edge st-keep in St st) [236 sts].

Size L Only

K2 (1 edge st-keep in St st, 1 Tuck st); work 27-st CB rep (right-slanting cables) 4 times, (14 sts rem before m), C5B, КЗ, СЗВ, K3; C4B (4 center sts); K3, C3F, K3, C5F, work 27-st CF rep (left-slanting cables) 4 times, end K2 (1 tuck st, 1 edge st-keep in St st) [252 sts].

Size XL Only

K2 (1 edge st-keep in St st, 1 Tuck st); work 27-st CB rep (right-slanting cables) 5 times; C4B (4 center sts); work 27-st CF rep (left-slanting cables) 5 times, end K2 (1 tuck st, 1 edge st-keep in St st) [278 sts].

Rows 5, 9,13 and 17 (RS): Knit.

Row 7: Cont in patt, turn all C3 Cables as est. Row 9: Cont in patt, turn all C4 Cables as est. Rows 11: Cont in patt, turn all C3 and C5 Cables as est.

Row 15: Cont in patt, turn all C3 and C4 Cables as est.

Row 19: Rep Row 11.

Row 21: Rep Row 9.

Row 22: Rep Row 2.

SLEEVE CABLE & TUCK RIB (27-strep) Also see Chart.

Row 1 (RS): Knit

Row 2 and all WSRs: Purl.

Row 3 (Set-Up Row): K2 (1 edge st-keep in St st, 1 Tuck st); C3F, K3, C5F, K3, C3F, K3, C4F, КЗ, СЗВ, КЗ, C5B, КЗ, C3B, end K2 (1 tuck st, 1 edge st-keep in St st) [48 sts]. Rows 5, 9,13 and 17 (RS): Knit.

Row 7: Cont in patt, turn all C3 Cables as est. Row 9: Cont in patt, turn C4 Cable as est. Rows 11: Cont in patt, turn all C3 and C5 Ca-
bles as est.

Row 15: Cont in patt, turn all C3 and C4 Cables as est.

Row 19: Rep Row 11.

Row 21: Rep Row 9.

Row 22: Rep Row 2.

INSTRUCTIONS

CO 194 (210, 236, 252, 278) sts.

Establish Cable & Tuck Rib Pattern Next row (RS): Beg Cable & Tuck Rib; work even for 22 rows in patt, end after Row 22. Establish Tuck Rib Pattern Next row (RS): Knit across, laddering sts down and reform 3-st Tuck Ribs (see Stitch Glossary), while at the same time, remove all m’s.

Establish Stockinette St

Change to St st for rest of the Body.

Next row (WS): Purl, dec 0 (0, 2, 2, 0) sts evenly, while at the same time, pm ea side of center 100 (108, 120, 128, 144) sts for Back leaving 47 (51,57, 61,67) sts ea side of m’s for Fronts [194 (210, 234, 250, 278) total sts]. Cont even in St st until piece meas 2″ above rib patt, end after WSR.

Shape Sides

Next (Dec) row (RS): Work across to 2 sts before first m, ssk, slm, K2tog; work to 2 sts before second m, ssk, slm, K2tog; work to end [4 sts dec’d; 2 ea side of side m’s]. Work 11 rows even in St st. Rep last 12 rows 5 (4, 5, 4, 5) times [170, 190, 210, 230, 254) sts rem; 88 (98, 108, 118, 132) Back sts, 41 (46, 51, 56, 61) sts for ea Front]. Work even until piece meas 19 (1916, 20, 201/г, 21)” from CO, end after WSR.

Divide Back and Fronts Dividing Row (RS): Work across to 3 (3,3,4, 5) sts before first m, place sts just worked on stitch holder for Right Front; BO 6 (6,6,8,10) armhole sts, work across to 3 (3, 3, 4, 5) sts past next m, turn. Place rem sts on stitch holder for Left Front. Next row (WS): BO 6 (6, 6, 8, 10) armhole sts, work to end [82 (92, 102, 110, 122) sts rem for Back].

Shape Armholes

Next row (RS): BO 2 (2, 3,3, 4) sts at beg of next 2 rows [78 (88, 96, 104, 114) sts rem]. Next row (RS): Dec 1 st each side EOR 4 (6, 7, 8, 10) times [70 (76, 82, 88, 94) sts rem]. Work even until armhole meas 6 (6V£, 7, 7V£, 8)” from Dividing row, end after WSR. PM each side of center 18 (20, 22, 24, 26) sts for neck.

Shape Neck and Shoulders Next row (RS): Work across to m; join a second ball of yarn and BO center sts; work to end [26 (28, 30, 32, 34) sts rem ea shoulder]. Working both sides at same time, at each neck edge, dec 1 st EOR 4 times [22 (24, 26, 28, 30) sts ea shoulder; while at the same time, when armhole meas 7 (71Д 8, 8Vfe, 9)” from Dividing row, end after WSR. Next row (RS): At each armhole BO 11 (8, 8, 7, 7) sts 1 (2, 2, 3, 3) times. BO rem sts.

LEFT FRONT

With RS facing, join yarn at underarm, ready to work a RSR. Work 2 rows even, end after WSR.

Shape Armhole and Neck Next row (RS): Shape armhole at beg of RSR as for Back, while at the same time, at neck edge, work 8 (10,12,14,16) rows even, end after RSR. At neck edge, (end of RSR), dec 1 st EOR 10 (11, 12, 13, 12) times, then work even until piece meas same as Back to beg of shoulder shaping, end after WSR [22 (24, 26, 28, 30) sts rem for shoulder].

Shape Shoulders

Next row (WS): Work as for Back.

RIGHT FRONT

Work as for Left Front, reversing all shaping. SLEEVES

CO 48 sts (all sizes).

Establish Cable & Tuck Pattern Next row (RS): Beg Cable & Tuck Rib; work even for 22 rows in patt, end after Row 22. Establish Tuck Rib Pattern Next row (RS): Knit across, laddering sts down and reform 3-st Tuck Ribs (see Stitch Glossary), while at the same time, remove all m’s.

Establish Stockinette St

Change to St st for rest of the Sleeve.

Inc Row (WS): Purl, inc 0 (0, 4, 4, 8) sts evenly across [48 (48, 52, 52, 56) sts].
Shape Sleeve

Next row (RS): Beg this row, inc 1 st ea side EOR 2 times, end after WSR [50 (50, 54, 54, 58) sts]. Next row (RS): Work 8 (8, 4, 4, 6) rows even, end after WSR. Next row (RS): Beg this row, inc 1 st ea side every 8 (7, 8, 7, 7) rows 10 (12, 12, 14, 14) times [70 (74, 78, 82, 86 sts]. Work even until piece meas 17 (171Д 18,18V£, 19)” from CO, end after WSR. Shape Sleeve Cap

Next row (RS): BO 3 sts at beg of next 2 rows, 2 sts at beg of next 4 rows [56 (60, 64, 68, 72) sts rem]. Next row (RS): Dec 1 st each side EOR 11 (13, 15, 17, 18) times [34 (34, 34, 34, 36) sts rem]. Next row (RS): BO 2 sts at beg of next 6 rows, 3 sts at beg of next 4 rows [10 (10, 10, 10, 12) sts rem]. BO rem sts.

COLLAR

CO 132 (132, 132, 144, 144) sts.

Establish Cable & Tuck Rib Pattern Rows 1 and 2: Work 2 rows even in St st. Row 3 (Set-Up Row) (RS): K2 (1 edge st; keep in St st, 1 Tuck st); [СЗВ, K3] 1 (1,1, 2, 2) time(s), work 27-st CB rep of Body Cable and Tuck patt across to 4 center sts; C4B (center of Collar); work 27-st CF rep of Body Cable and Tuck patt 2 times, [C3F, K3] 1 (1,1, 2, 2) time(s), end K2 (1 tuck st, 1 edge st-keep in St st) [48 sts].

Row 4: Purl.

Shape Collar (at neck edge)

Note 1: Shaping may be worked as BO sts instead of Short rows, if desired. If working BO sts, be sure to ladder Tuck sts down before ea BO as needed. Note 2: Work Rows 1-22, then rep Rows 1-20 once [42 rows total]. Rows 5-32: Work across in patt, working 2 sts less at end of ea row [14 times total ea side of Collar.] Rows 33-40: Work across in patt, working 3 sts less ea row [4 times total each side of Collar]. Rows 41 and 42: Cont in patt, work 2 rows even across all sts. BO all sts loosely.

FINISHING

Sew shoulder seams. Set in Sleeves. Sew Sleeve and side seams.

Right Front Band

With RS facing, beg at lower Right Front, pick
up and K92 (96,100,104,108) sts evenly up center Front to beg of neck shaping. Next row (WS): Beg St st; knit 4 rows, end after RSR. Next (turning) row (WS): Knit. Next row (RS): Cont in St st, work 4 rows. Next row (RS): BO all sts. Fold band to WS and slip st in place along pick-up row.

Left Front Band

With RS facing, beg at Left Front neck edge, pick up and work as for Right Front Band. Using yarn needle, weave in all ends. Install zipper.